Service lifts (also known as dumb waiters) are used within a number of industries from catering to transport food and beverages between floors to office environments helping transport documents and files.
Bi-parting doors at serving height
| Loading: | single entry, open through or adjacent entry |
| Rated load: | 50, 100 or 300 kg |
| Speed: | v = 0,2 / 0,25 / 0,3 oder 0,45 m/s |
| Landing doors: | acc. to DIN 18090 or 18092, respectively |
| Position of the winding unit: |
above the shaft beside the shaft below the shaft |
| Control system: | microprocessor controller as call/send controller with call accepted/position indicator, short-stroke buttons, diagnostic system |
Bi-parting doors at Floor Level
| Loading: | single entry or open through |
| Rated load: | 100 or 300 kg |
| Speed: | v = 0.20 or 0.30 m/s |
| Landing doors: | acc. to DIN 18090 or 18092, respectively |
| Position of the winding unit: |
above the shaft |
| Control system: | microprocessor controller as call/send controller with call accepted/position indicator, short-stroke buttons, diagnostic system |
Hinged Doors
| Loading: | single entry, open through or adjacent entry |
| Rated load: | 100 or 300 kg |
| Speed: | v = 0.15 / 0.2 / 0.25 or 0.30 m/s |
| Landing doors: | acc. to DIN 18090 |
| Position of the winding unit: |
above the shaft at the bottom beside the shaft |
| Control system: | microprocessor controller as call/send controller with call accepted/position indicator, short-stroke buttons, diagnostic system |
Combinations Doors
Combination service lifts are heavily used within the catering industry, allowing dual purpose transport. With the extra compartment you can transport food hygienically whilst also transporting refuse separately.
Due to the hygienic requirements around food transportation all lift compartments and shelves are made from stainless steel.
| Loading: | single entry or open through |
| Rated load: | 100 or 300 kg |
| Speed: | v = 0.20 or 0.30 m/s |
| Landing doors: | acc. to DIN 18090 or 18092, respectively |
| Position of the winding unit: |
above the shaft |
| Control system: | microprocessor controller as call/send controller with call accepted/position indicator, short-stroke buttons, diagnostic system |
